Branchennachrichten

Klassifizierung von Schäkeln

2021-08-05

Schäkel ist ein unverzichtbares Rigging-Zubehör beim Heben von Bauarbeiten. Der Schäkel kann verwendet werden, um Heberollen und feste Anschlagmittel zu verbinden. Es ist ein leichtes und flexibles Verbindungswerkzeug, das weit verbreitet ist.Fesselnkönnen nach ihren Aussehensmerkmalen in Bügelschäkel und U-förmige Schäkel unterteilt werden. Je nach Verwendungszweck gibt es: Kettenschäkel, Ankerschäkel und Schwimmschäkel.

(1) Die KetteFessel is a Fessel used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the Fessel, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust. 

(2) Anker Fessel is the Fessel used to connect the anchor chain and the sinker, and the method of use is the same as the chain Fessel.

(3) The floating Fessel is the Fessel used to connect the floating body and the anchor chain, and the method of use is the same as the chain Fessel.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept